Western Digital My Cloud EX2 Ultra User Manual page 85

2. If you made any changes, click Save (appears next to the updated field once a
change is made).
Note: Throughout the My Cloud EX2 Ultra dashboard, the Apply and Cancel
buttons display only if you make changes.
Language and Clock
In this section of the General screen, you can change the language that displays in the
My Cloud EX2 Ultra device's interface and set the date and time. The date and time are
synchronized to the NTP (Network Time Protocol) server by default. You have the option
of setting the date and time manually or allowing the NTP to access the Internet and
automatically set the time. If you are not connected to the Internet, you must enter the
date and time manually.
1. In the Language & Clock section, view or modify the following settings
Language
Time Zone
NTP Service
Primary Server
Date & Time
Time Format
2. Click Save for each change you make.
MY CLOUD EX2 ULTRA PRIVATE CLOUD STORAGE
USER MANUAL
From the drop-down list, select the language you'd
like to display on your My Cloud EX2 Ultra Private
Cloud Storage web pages. The default language is
English.
From the drop-down list, select the time zone
where your device is located.
Enable or disable NTP service, which automatically
synchronizes your device to update the time and
date. A dialog box displays current NTP servers.
You can add another NTP server if you choose.
Change the primary server used for your NTP
service.
• To change the primary server used for your NTP
service, click Configure,
• Click Add User NTP, and then enter the URL
address of the new primary server.
• Click Save.
Displays the device date and time. This information
is synchronized to the NTP (network time protocol)
server by default.
From the drop-down list, select 12 (12-hour clock)
or 24 (24-hour clock).
CONFIGURING SETTINGS
:
80