Device Maintenance; Scan Disk - Western Digital My Cloud EX2 Ultra User Manual

Saving a Configuration File
Use the following steps to save a configuration file.
1. In the System Configuration area, click Save Config File.
2. The configuration file saves to your desktop.
Importing a Configuration File
Use the following steps to save a configuration file.
1. In the System Configuration area, click Import File.
2. Navigate to the location of your saved configuration file and select it. The
configuration file is loaded. The device will reboot. Don't unplug the device during this
rebooting process. Once the reboot is complete, launch the dashboard.

Device Maintenance

The Device Maintenance area allows you to reboot or hibernate your My Cloud EX2 Ultra
device. This area also displays the amount of time the device has been up and running.
Setting Device to Hibernate
Use the following steps to safely set your My Cloud EX2 Ultra device to hibernate.
1. In the top menu, click Settings.
2. In the left menu, click Utilities.
3. In the Device Maintenance area, click Hibernate.
4. Review the confirmation message, and then click OK. Your My Cloud EX2 Ultra safely
shuts down.
Rebooting the Device
1. In the top menu, click Settings.
2. In the left menu, click Utilities.
3. In the Device Maintenance area, click Reboot.
4. Review the confirmation message, and then click OK. Your My Cloud EX2 Ultra safely
reboots.

Scan Disk

The Scan Disk area allows you to scan your device's hard disks for any errors.
Scanning Your Disk
MY CLOUD EX2 ULTRA PRIVATE CLOUD STORAGE
USER MANUAL
CONFIGURING SETTINGS
94