Disk Status - Western Digital My Cloud EX2 Ultra User Manual

9. Review the summary of your selections, and then click Next.
10. Review the warning screen, and then click Finish.
11. The requested hard drive changes begin. Do not turn off your My Cloud EX2 Ultra
device while these changes are in progress.
12. When the process is complete, click Finish again.
Auto-Rebuilding your RAID
The Auto-Rebuilding option allows you to automatically rebuild the RAID for your
My Cloud EX2 Ultra device in case of drive corruption. Use the following steps to enable
the auto-rebuild option.
1. On the navigation bar, click Storage to display the Storage screen.
2. Click RAID, if not already selected.
3. Review the Auto-Rebuild field to determine whether your My Cloud EX2 Ultra
device is currently set up for auto-rebuild.
If Auto-Rebuild is off, click the toggle button


Disk Status

The Disk Status screen identifies the health of the disk drives as well as the status and
information on each drive used in your My Cloud EX2 Ultra device. The Disk Status
screen consists of the following areas:
Disks Profile: This area displays the general status of all of the disk drives on

your device.
System Disks: This area identifies the drives on your device, the status of each

drive, and the amount of space on that drive.
If a drive is unsuitable, the status is
Note:
MY CLOUD EX2 ULTRA PRIVATE CLOUD STORAGE
USER MANUAL
MANAGING STORAGE ON MY CLOUD EX2 ULTRA
to enable Auto-Rebuild.
.
not compatible
60