Getting Started; Physically Connecting The Device - Western Digital My Cloud Mirror User Manual

Getting Started

3

Physically Connecting the Device

Getting Started Using Online Setup Software
Accessing Content
It's easy to set up the My Cloud Mirror Cloud Storage device -- all you have to do is unpack
your device, connect it, and wait for the Power LED on the front of your device to turn a solid
blue. Then, setup your system using the procedure
Software" on page 11.
For information about safely shutting down and disconnecting the device, see
page 91
Physically Connecting the Device
4
Follow the steps below to connect the My Cloud Mirror Cloud Storage device to a home or
small office network.
Important: To avoid overheating, make sure the device is upright as shown in
Important: We recommend that you use the enclosed Ethernet cable for
MY CLOUD MIRROR (GEN 2) CLOUD STORAGE
USER MANUAL
the illustration above and nothing is blocking or covering the slots
and openings on the top and bottom of the device. In the event of
overheating, the device will perform a safe shutdown, interrupting
all processes currently being performed. If this occurs, data may
be lost.
optimal performance.
"Getting Started Using Online Setup
2
3
3
1
"Utilities" on
10