Volume Virtualization - Western Digital My Cloud EX2 Ultra User Manual

Modifying an iSCSI Target
Use the following steps to modify an iSCSI target.
1. On the Storage page, click iSCSI.
2. Under iSCSI Target list, click Details next to the target you'd like to modify.
3. Make all of your necessary changes, and then click Save.
Deleting an iSCSI Target
Use the following steps to delete an iSCSI target.
1. On the Storage page, click iSCSI.
2. Under iSCSI Target list, click Details next to the target you'd like to delete.
3. Ensure that this is the target you want to delete, and then click Delete. The selected
target is deleted and removed from the iSCSI Target list.
Enabling iSCSI iSNS Client
The Internet Storage Name Service (iSNS) protocol is used for interaction between iSNS
servers and iSNS clients. iSNS clients are computers, also known as initiators, that are
attempting to discover storage devices, also known as targets, on an Ethernet network.
Use the following steps to configure the iSCSI iSNS client.
1. On the navigation bar, click Storage to display the Storage screen.
2. If not already selected, click iSCSI.
3. Click the toggle button
4. In the iSCSI iSNS Client field, click the toggle button
5. Click Configure.
6. Enter the iSNS client server address, and then click Apply.

Volume Virtualization

Volume Virtualization simplifies scalability by allowing you to map iSCSI targets on other
network storage devices and present them as volumes on your My Cloud EX2 Ultra
device.
MY CLOUD EX2 ULTRA PRIVATE CLOUD STORAGE
USER MANUAL
MANAGING STORAGE ON MY CLOUD EX2 ULTRA
to ON to enable iSCSI.
.
63