Western Digital My Cloud EX2 Ultra User Manual page 69

Creating a Virtualized Volume
Use the following steps to create a virtualized volume on your device.
1. On the Storage page, click Volume Virtualization, if not already selected.
2. Click Create to display the Create Volume Virtualization screen:
3. In the Device IP field, enter the IP address of the device where the iSCSI target
resides, and then click Next.
4. Select an iSCSI target from the retrieved list, and then click Next.
5. To add authentication to the target, click the toggle button
Name and Password, and then click Next.
Disabled authentication is the default. To keep the default, ensure that the

Authentication field is OFF, and then click Next.
6. Select a LUN (Local Unit Number) from the list, and then click Next.
7. Enter a name for the share folder, and then click Next.
8. Review the Volume Virtualization summary to ensure that your settings are correct,
and then click Save. A virtual volume is created.
Connecting a Virtualized Volume to a Target
Use the following steps to connect a virtualized volume to a target on your device.
1. On the Storage page, click Volume Virtualization, if not already selected.
2. Click Details next to the virtual volume you'd like to connect.
3. Click Connect. Once connected to the target, the system automatically formats the
LUN, if it hasn't been done before.
4. Once your virtual volume is formatted, click Close. The state of the volume is
changed to Connect.
Your new virtual volume is now available on your My Cloud EX2 Ultra device.
MY CLOUD EX2 ULTRA PRIVATE CLOUD STORAGE
USER MANUAL
MANAGING STORAGE ON MY CLOUD EX2 ULTRA
to ON, enter a User
64