Headlamp Switch - Polaris 2005 SPORTSMAN 500 Servise Manual

ELECTRICAL
the life of the lamp.
1
4. Install the new headlamp and harness assembly
into the headlight assembly.

HEADLAMP SWITCH

Remove the headlight pod cover.
headlamp plug wires (Brown and Yellow) at back of
connector. Turn headlight on.
Brown
Yellow
Upper Headlamp Plug Wires
Brown
Green
Lower Headlamp(s) Plug Wires
BRAKE LIGHT / WORK LIGHT
REPLACEMENT
The brake light (A) and the work light (B) are both
located in the rear tail lamp housing.
B
1. To remove the worklight electrical connector (B),
pull down on the connector lock and pull the
connector from the bulb assembly.
10.34
Probe the
A
B
2. To remove the brake light electrical connector (B),
press in on the tab on the connector to unlock the
connector and pull the connector from the bulb
assembly.
A
3. To remove either of the bulbs, turn the bulb
counter--clockwise to remove and pull out. Turn
the bulb clockwise to install. Refer to the parts
manual for the correct bulb part number.
Remove
Install
WORKLIGHT SWITCH
Remove the headlight pod cover to locate the switch
wires. The switch simply snaps out by pushing in on
the tabs on both sides of the switch.