Gear Cluster Disassembly
Retaining Ring
Engagement
Dog (P)
Bearing
20. Remove the bearing from the reverse shaft using
a bearing puller. Slide the engagement dog (P) off
of the reverse shaft.
21. Remove the retaining ring and washer from the
reverse shaft.
22. Remove the bearing from the input shaft using a
bearing puller.
23. Remove the 33T gear (R) and needle bearing (Q)
from the reverse shaft.
24. The reverse shaft should slide out of the silent
chain (S) to separate the assembly.
Reverse Shaft
Needle
Bearing (Q)
33T Gear (R)
Washer
Bearing
Input Shaft
Bearing
25. Remove the rest of the bearings from the shafts.
26. Remove the engagement dog from the reverse
shaft.
27. Remove the gear, split bearing, and washer from
the reverse shaft.
TRANSMISSION
S
8.11