Panasonic KX-TDA50 Manual page 33

*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid IP address range: "0.0.0.0" to "255.255.255.255"
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
6. a.
In the IP Address box, type the IP address of the
*1
card .
b.
In the Subnet Mask box, type the subnet mask
address of the network
c.
Click [Apply].
7. If the IP address of the default gateway needs to be
entered:
a.
Click Common Settings. A dialog box will appear.
b.
In the Gateway Address box, type the IP address of
the default gateway
c.
Click [OK].
Note
To activate any changes made in step 7, it is
necessary to set all installed IP-EXT cards to out-of-
service status (OUS), then back to in-service status
(INS).
8. Move the mouse pointer over the IP-EXT card, then click
INS to set the card to in-service status.
Information about IP Proprietary Telephones
4.1 Programming the IP-EXT Card
*2
.
*3 .
33