Panasonic KX-TDA50 Manual page 10

1.2 Network Management
• The Hybrid IP-PBX receives VLAN settings only from the connected switching hub. Therefore,
VLAN settings for the Hybrid IP-PBX must be assigned at the switching hub.
• Some PC LAN cards allow VLAN settings to be assigned. However, when using a PC connected
to an IP-PT with 2 ports, the VLAN settings for PC communications must be assigned only to the
secondary port of the IP-PT. Any VLAN settings assigned to the PC LAN card must be disabled.
These settings can usually be identified by "802.1Q", "802.1p", or "VLAN" in their name.
• If you are using an IP-PT with a primary port only (e.g., KX-NT265), a PC cannot be connected to
the IP-PT.
10 Information about IP Proprietary Telephones