IP-PTs with a single line display (e.g., KX-NT265)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
VOL
Press VOLUME to
Press SP-PHONE.
select "Network".
To enter the IP address of the IP-EXT card (PBX IP Address)
HOLD
Press HOLD to return
Press VOLUME
to the Menu screen.
to select "PBX".
To set VLAN parameters
To the VLAN settings
OR
To end programming
Press STORE.
*
Valid IP address range: "1.0.0.0" to "223.255.255.255"
PROG.
Press PROGRAM
while "Searching" is displayed.
Press VOLUME to
select "DHCP (Enable)".
VOL
Press SP-PHONE
twice.
The IP-PT will reboot
and establish connection
to the network.
4.2 Programming the IP Proprietary Telephone
VOL
PBX IP
Address*
Press SP-PHONE.
Information about IP Proprietary Telephones
HOLD
Press HOLD to return
to the Menu screen.
35