Wipe Disk - Lexmark T650 Service Manual
Hide thumbs
Also See for T650:
- Service manual (588 pages) ,
- User manual (219 pages) ,
- Instructions manual (19 pages)
Table of Contents
Advertisement
Wipe Disk
This setting provides you with a tool for erasing the contents of a disk.
Warning: Wipe Disk removes a disk's data in such a way that it cannot be recovered.
To change this setting:
1. Touch
to select Wipe Disk from Configuration Menu.
Note: If an advanced password has been established, you must enter this password in order to change
the setting. If no advanced password exists, you can establish one by using the keyboard that appears on
the LCD.
2. Touch
to select Wipe disk (fast) or Wipe disk (secure).
Contents will be lost. Continue? appears on the touchscreen.
3. Touch Back to return to Configuration Menu.
4. Touch Yes to continue, or touch No to exit.
Font Sharpening
This setting allows a user to set a text point size below which the high frequency screens are used when
printing font data. For example, at the default 24, all text in font sizes 24 and less will use the high frequency
screens. The values for this setting range from 0 to 150, and the default value is 24. This setting affects
PostScript, PCL, and XL.
To change this setting:
1. Touch
to select Font Sharpening from the Configuration Menu.
2. Touch
to increase the value or
3. Touch Submit to save the change.
Touch Back to cancel and return to the Configuration Menu.
This function is not supported when the device generates output at 600 dpi resolution.
Require Standby
This setting determines if the Standby Mode is On or Off. The default is On.
If Standby Mode is On, the printer begins functioning in Standby Mode when it remains idle for an amount of
time. The Standby Mode enables the printer:
•
To consume less energy than when operating in normal mode but not as little as when operating in Power
Saver
•
To return to the Ready state more quickly than when operating in Power Saver
To change this setting:
1. Touch
to select Require Standby from the Configuration Menu.
2. Touch Submit to save the change.
Touch Back to cancel and return to the Configuration Menu.
to decrease the value.
4062-XXX
Previous
Go Back
3-57
Diagnostic aids
Next
Advertisement
Table of Contents
