4062
Step
7
Check the printhead installation.
Is the above component properly installed?
8
Perform a print test.
Does the problem remain?
After image
Leading edge
Trailing edge
The ghost appears on the media which, may be the image from the previous page or part of the page
currently printing.
Step
1
Check the media condition.
Load new, dry, recommended media.
Re-print the defective image.
Does the error continue?
2-162
Service Manual
Check
Check
Yes
Go to step 8.
Reinstall and
adjust the
printhead
assembly.
Go to
"Printhead
assembly
removal
(T650)" on
page 4-59
"Printhead
assembly
removal (T652,
T654, T656)" on
page
4-60.
Contact next
Problem solved.
highest level of
tech support.
Yes
No
Go to step 2.
Problem solved.
Previous
No
Next
Go Back
or