Lexmark T650 Service Manual page 62

4062
Error
code or
message
202.34 Sensor (fuser output)
lingering jam.
Type 2 fuser
202.35 Sensor (fuser output)
lingering jam.
Destination is output
option.
Type 2 fuser
202.36 Sensor (fuser output)
lingering jam.
Destination is
standard bin.
Type 2 fuser
202.37 Sensor (fuser output)
lingering jam.
Destination is output
option.
Type 2 fuser
202.38 Sensor (fuser output)
static jam
and
Sensor (narrow
media) static jam
Type 2 fuser
202.50 Paper jam around
fuser exit or redrive
area.
Type 1 fuser
Fuser page count has
exceeded life
2-26
Service Manual
Error contents
Media reached the sensor
(fuser output) but did not clear
it in the specified time.
Media reached the sensor
(fuser output) but did not clear
it in the specified time.
and
Media did not reach the sensor
(narrow media)
Media reached the sensor
(fuser output) but did not clear
it in the specified time.
and
Media did reach the sensor
(narrow media)
Media reached the sensor
(fuser output) but did not clear
it in the specified time.
and
Media did reach the sensor
(narrow media)
Media remains on the sensor
(fuser output) and the sensor
(narrow media) during the
warm up sequence.
Page may be jammed in fuser
exit or redrive area.
Description/Action Possible repair actions
Go to sensor (fuser output)
lingering jam service check.
See "Sensor (fuser output)
lingering jam service check."
on page 2-130.
Go to sensor (fuser output)
lingering jam service check.
See "Sensor (fuser output)
lingering jam service check."
on page 2-130.
Go to sensor (fuser output)
lingering jam service check.
See "Sensor (fuser output)
lingering jam service check."
on page 2-130.
Go to sensor (fuser output)
lingering jam service check.
See "Sensor (fuser output)
lingering jam service check."
on page 2-130.
1. Go to sensor (fuser output)
static jam service check.
See "Sensor (fuser
output) static jam service
check" on page 2-131.
2. Go to sensor (narrow
media) static jam service
check. See "Sensor
(narrow media) static jam
service check" on
page 2-133.
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.
4. Go to sensor (fuser output)
service check. See
"Sensor (fuser output)
service check" on
page 2-119.
5. Go to sensor (narrow
media) service check. See
"Sensor (narrow media)
service check" on
page 2-120.
Previous
Next
Go Back