Print Contrast - Lexmark T650 Service Manual

4062-XXX

Print Contrast

The print contrast setting controls the developer voltage offset.
The print contrast can be adjusted to Low, Medium, or High. The default setting is Medium.
Charge Roll
The charge roll can be adjusted to Low, Medium, or High. The default setting is Medium.
Gap Adjust
The setting adjusts the minimum gap between sheets. Increasing this value may reduce curl of some printed
media and eliminate some output bin stacking problems. However, increasing this value also results in slower
overall performance, measured in pages per minute. The range of values is 0 to 255, and the default value is 0.
Auto Dark Adj
The Auto Dark Adj can be adjusted to Enable or Disable. The default setting is Enable.
3-22
Service Manual
Previous
Next
Go Back