Lexmark T650 Service Manual page 54

4062
Error
code or
message
200.39 Sensor (input)
lingering jam
Source = Tray 3
Tray level = Empty
200.47 Sensor (input)
lingering jam
Source = Tray 4
Tray level = Not Low
200.48 Sensor (input)
lingering jam
Source = Tray 4
Tray level = Low
200.49 Sensor (input)
lingering jam
Source = Tray 4
Tray level = Empty
200.57 Sensor (input)
lingering jam
Source = Tray 5
Tray level = Not Low
200.58 Sensor (input)
lingering jam
Source = Tray 5
Tray level = Low
200.59 Sensor (input)
lingering jam
Source = Tray 5
Tray level = Empty
201.00 Sensor (fuser output)
area jam.
Type 1 fuser
201.01 Main drive motor
assembly load error.
Type 1 fuser
2-18
Service Manual
Error contents
The media reached the sensor
(input) but did not clear it within
the specified time.
The media reached the sensor
(input) but did not clear it within
the specified time.
The media reached the sensor
(input) but did not clear it within
the specified time.
The media reached the sensor
(input) but did not clear it within
the specified time.
The media reached the sensor
(input) but did not clear it within
the specified time.
The media reached the sensor
(input) but did not clear it within
the specified time.
The media reached the sensor
(input) but did not clear it within
the specified time.
The media is jammed in the
sensor (fuser output) area.
The main drive motor assembly
has failed or caused high
mechanical load due to paper
jam or bind.
Description/Action Possible repair actions
Go to sensor (input) lingering
jam service check.
See "Sensor (input) lingering
jam service check." on
page 2-125.
Go to sensor (input) lingering
jam service check.
See "Sensor (input) lingering
jam service check." on
page 2-125.
Go to sensor (input) lingering
jam service check.
See "Sensor (input) lingering
jam service check." on
page 2-125.
Go to sensor (input) lingering
jam service check.
See "Sensor (input) lingering
jam service check." on
page 2-125.
Go to sensor (input) lingering
jam service check.
See "Sensor (input) lingering
jam service check." on
page 2-125.
Go to sensor (input) lingering
jam service check.
See "Sensor (input) lingering
jam service check." on
page 2-125.
Go to sensor (input) lingering
jam service check.
See "Sensor (input) lingering
jam service check." on
page 2-125.
Go to sensor (fuser output)
service check.
See "Sensor (fuser output)
service check" on
page 2-119.
1. Check all connections on
the main drive motor
assembly.
2. Check all connections on
the system card assembly.
3. Replace the main drive
motor assembly if problem
remains. Go to "Output
cover assembly removal"
on page 4-53.
Previous
Next
Go Back