After Image - Lexmark T650 Service Manual

After image

Leading edge
Trailing edge
The ghost appears on the media which, may be the image from the previous page or part of the page
currently printing.
Step
1 Check the media condition.
Load new, dry, recommended media.
Re-print the defective image.
Does the error continue?
2 Check the heat roll and pressure roll.
Remove the fuser unit assembly.
Is there contamination or cracks on the heat roll and/or
pressure roll?
3 Perform a print test.
Does the problem remain?
Check
CAUTION: : Allow
the fuser unit
assembly to cool
down.
Yes
Go to step 2. Problem solved.
Replace the Go to step 4.
fuser unit
assembly.
Go to "Fuser
unit assembly
removal (T650,
T652, T654)" on
page 4-23.
Contact next Problem solved.
highest level of
tech support.
Diagnostic information
4062
No
2-171