Attach Jpeg From Camera; Destination Address; Sender Name; Send E-Mail For Testing - Bosch Dinion IP NWC-0495 Installation Manual

Dinion IP
| Installation Manual
Caution
When a cellphone is used as the receiver, make sure to activate the e-mail
or SMS function, depending on the format, so that these messages can be
received. You can obtain information on operating your cellphone from
your cellphone provider.

Attach JPEG from camera

Click the checkbox to select the cameras from which JPEG images are sent.
An enabled video input is indicated by a check mark.

Destination address

Enter the e-mail address for alarm e-mails here. The maximum address length is
49 characters.

Sender name

Enter a unique name for the e-mail sender, for example the location of the unit.
This will make it easier to identify the origin of the e-mail.

Send e-mail for testing

Test the e-mail function by clicking the Send now button. An alarm e-mail is
immediately created and sent.

Relay Settings

Here, you can make the settings for the alarm sources and alarm connections.

Alarm out

You can choose various events that activate the output automatically. Thus, for
example, it is possible to switch on a spotlight in response to a motion alarm and
switch it off again when the alarm is over.
Bosch Security Systems | 2006-05 | V2.0
EN | 75