Installer Options; Recording - Bosch Dinion IP NWC-0495 Installation Manual

Dinion IP
EN | 52 | Installation Manual
When you click Area Selection a pop-up window appears with a still picture of
the received video. Use your mouse to select an area in the picture. BLC Level
adjusts the balance between the selected BLC area and its surrounding.

Installer Options

Select the synchronization method for the camera: Internal for free running
camera operation; Line Lock to lock to the power supply frequency.
You can disable the buttons on the camera to prevent unauthorized change of the
camera settings. You can also disable the LED at the rear of the camera to avoid
it interfering with the image sensing of the camera.
Click the Restore all defaults button to restore the factory defaults. A
confirmation screen appears. Allow 5 seconds for the camera to optimize the
picture after a mode reset.

Recording

You can record the images from the camera in the RAM memory of the unit or
in an appropriately configured iSCSI storage device.
Local RAM memory is suitable for short-term recordings and pre-alarm
recordings in Ring mode operation.
Bosch Security Systems | 2006-05 | V2.0