3.1.9 Video encoding 3.1.10 Multicast 3.1.11 Power-over-Ethernet 3.1.12 Encryption 3.1.13 Receiver 3.1.14 Recording 3.1.15 Snapshots 3.1.16 Backup 3.1.17 Configuration Operation with external systems Bosch Security Systems Installation and Operation Manual Table of Contents | en AR18-10-B006 | v1.1 | 2010.06...
Page 4
6.2.4 Lens Wizard submenu Day/Night switching Browser connection System requirements Establishing the connection 7.2.1 Password protection in camera Protected network Connecting to a hardware decoder AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Customer service Maintenance 12.1 Testing the network connection 12.2 Repairs 12.2.1 Transfer and disposal Technical Data 13.1 Specifications 13.1.1 Dimensions 13.1.2 Accessories Glossary Bosch Security Systems Installation and Operation Manual Table of Contents | en AR18-10-B006 | v1.1 | 2010.06...
CAUTION! Low risk: Indicates a potentially hazardous situation. If not avoided, this could result in property damage or risk of damage to the unit. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Use only attachments/accessories specified by the manufacturer. Equipment change or modification could void the user's guarantee or authorization agreement. Bosch Security Systems Installation and Operation Manual Safety | en AR18-10-B006 | v1.1 | 2010.06...
The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power Source). AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. Bosch Security Systems Installation and Operation Manual Safety | en AR18-10-B006 | v1.1 | 2010.06...
Page 12
Cette brochure est disponible auprès du U.S. Government Printing Office, Washington, DC 20402, États-Unis, sous la référence n° 004-000-00345-4. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT. Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that...
Bosch notices Video loss Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.
This software is based in part on the work of the Independent JPEG Group. Bosch Security Systems Installation and Operation Manual Safety | en AR18-10-B006 | v1.1 | 2010.06...
Adaptive dynamic noise reduction – Impact-resistant dome (> IK10) – Tamper-resistant housing – Enhanced video motion detection – Video and data transmission over IP data networks AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 17
Fast, convenient configuration using the integrated Web server and a browser – Firmware update through flash memory – Convenient upload and download of configuration data Bosch Security Systems Installation and Operation Manual Introduction | en AR18-10-B006 | v1.1 | 2010.06...
The prerequisite for this is that the UDP and IGMP V2 protocols are implemented on the network. Bosch Security Systems Installation and Operation Manual System Information | en AR18-10-B006 | v1.1 | 2010.06...
The browser application has an icon for saving the video images provided by the unit as a file on your computer's hard drive. Clicking this icon stores the video sequences and they can be replayed with the Player from Bosch Security Systems included with the package. 3.1.17...
Page 21
FlexiDome2X IP Camera possible. Configuration settings can be stored as files on a computer and copied from one camera to another. Bosch Security Systems Installation and Operation Manual System Information | en AR18-10-B006 | v1.1 | 2010.06...
| System Information Operation with external systems The camera can be used with a variety of Bosch software and hardware systems: – Bosch Video Management System – VIDOS video management software – DiBos 900 Series digital video recorder –...
Page 23
The Divar 700 Series of digital video recorders can view and record images from the camera via a network connection. The Divar 700 Series controls the camera so that the correct settings are used. Bosch Security Systems Installation and Operation Manual System Information | en AR18-10-B006 | v1.1 | 2010.06...
AR18-10-B006 | v1.1 | 2010.06 Manual System requirements Configuration Manager BVIP Lite Suite MPEG ActiveX control DirectX control Microsoft Internet Explorer Sun JVM Player and Archive Player Adobe Acrobat Reader Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
VIDOS, Bosch VMS, or DIBOS 900 Series – H.264 compatible hardware decoder from Bosch Security Systems (such as VIP XD) as a receiver and a connected video monitor – Divar 700 Series Digital Video Recorder The minimum PC requirements are: –...
| Planning Install players Play back saved-video sequences using the Player from Bosch Security Systems. This can be found on the DVD-ROM supplied. to play back saved sequences using the Player, suitable ActiveX software must be installed on the computer.
To disassemble the unit proceed as follows: Using the special screwdriver bit, loosen the three tamper- resistant screws in the trim ring (the screws remain in place). Bosch Security Systems Installation and Operation Manual Installation | en AR18-10-B006 | v1.1 | 2010.06...
Remove the trim ring with dome by pulling it off of the base. Remove the inner liner by pulling it off of the base. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Use the surface mount box as a template for surface installation; use the paper template for flush installation. Bosch Security Systems Installation and Operation Manual Installation | en AR18-10-B006 | v1.1 | 2010.06...
Suspend the camera base from the plastic hook inside the surface mount box until the connections are made. Note: The surface mount box can be attached to a 4S box if required. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
+12 VDC / 24 VAC GND DC / 24 VAC Earth Alarm Out A Alarm Out B Alarm In Ground (Alarm In) Audio In Ground (Audio In) Audio Out Ground (Audio Out) Installation and Operation Manual FlexiDome2X IP Camera from the Bosch Security Systems...
Page 33
In the menu system, configure the alarm input as active low or active high. In the menu system, configure the relay output to operate as either normally open (NO) or normally closed (NC). Bosch Security Systems Installation and Operation Manual Installation | en AR18-10-B006 | v1.1 | 2010.06...
For flush mounted units, secure the camera module mounting base to the ceiling or wall. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
AR18-10-B006 | v1.1 | 2010.06 Select the Set Back Focus Now item. Do not change this selection as the camera is now in a special mode for adjusting focus. Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Align the tamper-resistant screws in the trim ring with the threaded ends in the mounting base. Use the supplied special screwdriver bit to tighten the three tamper-resistant screws. Bosch Security Systems Installation and Operation Manual Installation | en AR18-10-B006 | v1.1 | 2010.06...
Some menus automatically close after about two minutes; other menus have to be closed manually. AR18-10-B006 | v1.1 | 2010.06 Up key Menu/Select key (center) Right key Down key Left key Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Enhancements are set to reduce picture noise. Useful for conditional refresh DVR and IP storage systems because reducing noise reduces the amount of storage required. Bosch Security Systems Installation and Operation Manual Camera set-up | en AR18-10-B006 | v1.1 | 2010.06...
Page 40
| Camera set-up Infrared Use this mode if the camera is viewing a scene lit by infrared light. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Defaults submenu Item Selection Restore All? No, Yes Bosch Security Systems Description Enter an IP address for the camera. Use LEFT/RIGHT to change position in the address, use UP/DOWN to select the digit. Use SELECT to exit the address edit screen.
Select to fully open the iris. Follow the instructions for setting the backfocus for your particular lens type. After focusing the object of interest remains in focus under bright and low light conditions. Returns to Install menu. Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Note: The camera can also be connected to DIBOS 900 Series, VIDOS, Bosch Video Management System, and Divar 700 Series Digital Video Recorder, as well as third party video management systems.
If the connection is not established, the maximum number of possible connections may already have been reached. Depending on the device and network configuration, up to 25 web browsers, or 50 VIDOS or Bosch VMS connections are supported. 7.2.1 Password protection in camera A camera offers the option of limiting access across various authorization levels.
Make sure the devices are configured for the network environment and that the correct IP address for the remote location is set on the Alarm connections configuration page. Bosch Security Systems Installation and Operation Manual Browser connection | en AR18-10-B006 | v1.1 | 2010.06...
114 for more information. 7.5.3 SETTINGS Click SETTINGS in the application title bar to configure the camera and the application interface. A new page containing AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 47
Section 9 Advanced Mode, page 53 for more information on advanced settings. Note: It is recommended that only expert users or system administrators use the Advanced Mode. Bosch Security Systems Installation and Operation Manual Browser connection | en AR18-10-B006 | v1.1 | 2010.06...
Note: When entering names do not use any special characters, for example &. Special characters are not supported by the internal recording management system. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Define and change a separate password for each level while logged in as service or if the device is not protected by a password. Enter the password for the selected level. Bosch Security Systems Installation and Operation Manual Basic Mode | en...
RFC 868 protocol. Note: It is important to ensure that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
On to activate the automatic acceptance of DHCP-assigned IP addresses. Note: Certain applications (for example, Bosch Video Management System) use the IP address for the unique assignment of the device. If using these applications, the DHCP server must...
This page provides general information on the hardware and firmware system, including version numbers. No items can be changed on this page but they can be copied for information purposes when troubleshooting. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Clicking Set saves only the settings in the current window. Changes in any other windows are ignored. Click SETTINGS in the applications title bar to close the window without saving the changes made. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
Page 54
Note: When entering names do not use any special characters, for example &. Special characters are not supported by the internal recording management system. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
This user can operate the device, play back recordings, and also control a camera but cannot change the configuration. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
Enter the current date. Since the device time is controlled by the internal clock, it is not necessary to enter the day of the week – it is added automatically. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 57
If there are empty lines at the bottom of the table, for example after deletions, add new data by marking the row and selecting values from the list boxes. Bosch Security Systems Installation and Operation Manual Advanced Mode | en...
If the Custom option is selected, enter values in the X and Y position fields. Display milliseconds If necessary, display milliseconds for Time stamping. This information can be useful for recorded video images; however, AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 59
Select On for the transmitted video images to be watermarked. After activation, all images are marked with a green W. A red W indicates that the sequence (live or saved) has been manipulated. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
Internet address. JPEG interval Specify the interval at which the individual images should be generated for the M-JPEG image on the Livepage. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Motion+ mode, the sensor areas for motion detection are marked. Show event log The event messages are displayed with the date and time in a field next to the video image. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
File for system log Enter the path for saving the system log here. If necessary, click Browse to find a suitable folder. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
High resolution (4CIF/D1) with lower data rate – Low bandwidth High resolution (4CIF/D1) for low bandwidth connections – High resolution (4CIF/D1) for DSL connections at 500 kbps maximum Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
Page 64
Maximum data rate field. Maximum data rate This maximum data rate is not exceeded under any circumstances. Depending on the video quality settings for the AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 65
The basic setting Auto automatically adjusts to the optimum combination of movement and image definition (focus). Alternatively, use the slider to set a value between 9 and 51. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
Page 66
A value of 51 results in a very high refresh rate and lower image quality. Default Click Default to return the profile to the factory default values. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Click Preview << to close the preview displays. Note: Deactivate the display of the video images if the performance of the computer is adversely affected by the decoding of the data stream. Bosch Security Systems H.264 BP+ (HW decoder) H.264 MP Low Latency H.264 BP+ (HW decoder)
80 kbps for each connection. If you do not want any audio data to be transmitted, select Off. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Provide extra enhancement, such as AGC and SensUp to make usable pictures in low-light conditions. Smart BLC Settings optimized to capture details in high contrast and extremely bright-dark conditions. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
Adjust the balance between peak and average video control (-15 to 0 to +15). At -15 the camera controls the average video level, at +15 the camera controls the peak video level. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Sensitivity up Selects the factor by which the sensitivity of the camera is increased (OFF, 2x, 3x, etc. to a maximum of 10x). Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
Switch level Set the video Switch level at which the camera in Auto mode switches to monochrome operation (-15 to 0 to +15). AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
ATW: Auto tracking white balance allows the camera to continually adjust for optimal color reproduction. – AWB hold: Puts ATW on hold and saves the color settings. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Line lock to lock to the power supply frequency; – Internal for free running camera operation. Ticker bar Switches a ticker bar on the live image on or off. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
Page 76
A confirmation screen appears. Allow 5 seconds for the camera to optimize the picture after a mode reset. Note: The default IP address is restored. Connect to the camera again using this address. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
A Video Recording Manager (VRM) can control all recording when accessing an iSCSI system. The VRM is an external program for configuring recording tasks for video servers. For further information, contact your local customer service at Bosch Security Systems. 9.7.1 Storage Management Device manager...
Page 78
Rec. 1 stores stream 1, Rec. 2 stores stream 2. Check the boxes for the Overwrite older recordings option to specify which older recordings can be AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 79
Click a storage medium in the Managed storage media list to select it. Click Remove below the list. The storage medium is deactivated and removed from the list. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
– Pre-alarm: recording takes place in the pre-alarm time, during the alarm and during the post-alarm time only. – Off: no automatic recording takes place. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Enter the required retention time in hours or days for each recording. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
Click the date to be deleted. Click OK. The selection is removed from the table and the window is closed. Repeat for any other dates to be deleted. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
9.7.5 Recording Status Details of the recording status are displayed here for information. These settings cannot be changed. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
Only ten passwords can be defined here. Define a general password if more than ten connections are required, for example, when connections are initiated by a controlling AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 85
FlexiDome2X IP Camera system such as VIDOS or Bosch Video Management System. The camera connects to all remote stations protected by the same general password. To define a general password: Select 10 in the Number of destination IP address list box.
Page 86
IP addresses after each reboot, connection breakdown, or network failure. Audio Select On to transmit the audio stream with an alarm connection. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
This can lead to impairment of the VCA system. Observe the processor load and optimize the encoder settings or the VCA settings if necessary, or turn off VCA completely. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
Analysis type Select the required analysis algorithm. By default, only Motion+ is available — this offers a motion detector and essential recognition of tampering. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 89
Note: Additional analysis algorithms with comprehensive functions, such as IVMD and IVA, are available from Bosch Security Systems. Motion detector Motion detection is available for the Motion+ analysis type. For the detector to function, the following conditions must be met: –...
Page 90
Run a series of tests at different times of the day and night to ensure that the video sensor is operating as intended. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 91
(for instance, shining a flashlight directly on the objective) should trigger an alarm. The average brightness of the scene provides a basis for recognition. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
Page 92
AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 93
Click OK to save the configuration. Click the close button (X) in the window title bar to close the window without saving the changes. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
Assign the individual holidays to the VCA profiles, as described above. Deleting Holidays Delete defined holidays at any time: Click Delete. A new window opens. Click the date to delete. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 95
FlexiDome2X IP Camera Click OK. The item is deleted from the table and the window closes. The process must be repeated for deleting additional days. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
A delay period may be useful in avoiding false alarms or frequent triggering. During the delay period, the Silent MOTION+ configuration is always enabled. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Name The name makes it easier to identify the alarm in extensive video monitoring systems, for example with the VIDOS and Bosch Video Management System programs. Enter a unique and clear name here. Signal Ranges Exclude particular signal ranges in order to avoid false alarms.
Obtain information on operating your cellphone from your cellphone provider. Attach JPEG from camera Check the box to specify that JPEG images are sent from the camera. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 99
This makes it easier to identify the origin of the e-mail. Test e-mail Click Send Now to test the e-mail function. An alarm e-mail is immediately created and sent. Bosch Security Systems Installation and Operation Manual Advanced Mode | en AR18-10-B006 | v1.1 | 2010.06...
If the transfer was successful, the message Script successfully parsed. is displayed over the text field. If it was not successful, an error message is displayed with further information. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
The relay can be assigned a name here. The name is shown on the button next to Trigger relay. The LIVEPAGE can also be configured to display the name next to the relay icon. Bosch Security Systems Installation and Operation Manual Advanced Mode | en 101...
Page 102
102 en | Advanced Mode Trigger relay Click the button to switch the relay manually (for example, for testing purposes or to operate a door opener). AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, activate acceptance of IP addresses automatically assigned to the device. Certain applications (VIDOS, Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the device. If using these...
Page 104
Also ensure that Java application support is activated (in the Java Plug-in Control Panel of the Windows Control Panel). AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 105
A higher value is only useful if the iSCSI system is located in the same subnet as the camera. Bosch Security Systems Installation and Operation Manual Advanced Mode | en 105 AR18-10-B006 | v1.1 | 2010.06...
Page 106
To transfer the IP address of the device, click the Register button. Status The status of the DynDNS function is displayed here for information purposes; these settings cannot be changed. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Enter the user name that the Radius server uses for the camera in the Identity field. Enter the Password that the Radius server expects from the camera. Bosch Security Systems Installation and Operation Manual Advanced Mode | en 107 AR18-10-B006 | v1.1 | 2010.06...
Multicast Address Enter a valid multicast address to be operated in multicast mode (duplication of the data stream in the network). With the AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Date/time suffix: The date and time are automatically added to the file name. When setting this parameter, ensure that the date and time of the device are always set Bosch Security Systems Installation and Operation Manual Advanced Mode | en 109...
Enter an exact path to post the images on the FTP server. 9.10.5 Encryption If an encryption license is installed, this submenu gives access to the encryption parameters. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
The latest firmware can be obtained from your customer service center or from the Bosch Security Systems download area. To update the firmware: First, store the firmware file on your hard disk.
Page 112
Enter the full path of the file to upload or click Browse to locate the file. Click Upload to start the file transfer. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Keep this information at hand when seeking technical support. Select the text on this page with a mouse and copy it so that it can be pasted into an e-mail if required. Bosch Security Systems Installation and Operation Manual Advanced Mode | en 113...
When accessing the camera with a browser, the processor load and network information is available in the upper right of the window next to the Bosch logo. Move the mouse cursor over the icons to display numerical values. This information can help with problem solving or when fine tuning the device.
Recording video sequences Sections of the video sequence that is currently being shown on the Livepage can be saved on the computer's hard drive. The Bosch Security Systems Operation via the browser | en 115 to save single images. Installation and Operation Manual...
Click the recording icon – Click the recording icon again to stop recording. Play back saved video sequences using the Player from Bosch Security Systems. 10.1.7 Running recording program The hard drive icon below the camera images on the Livepage changes during an automatic recording.
Red bars indicate the points in time where alarms were triggered. Drag the green arrow to navigate to these points quickly. Bosch Security Systems Operation via the browser | en 117 Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 118
Playback is automatically stopped (paused) during scrolling. Trick mode requires significantly higher memory capacity and computing power. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Does the camera transmit all the data required? – Does the camera respond as desired to alarm events? – Is it possible to control peripheral devices, if necessary? Bosch Security Systems Installation and Operation Manual Troubleshooting | en 119 AR18-10-B006 | v1.1 | 2010.06...
Check all configuration parameters. Check all cables, plugs, contacts and connections. Check the IP addresses (terminal program). Check the data transmission with ping. Wait until there is a free connection and call the transmitter again. Bosch Security Systems...
Page 121
The unit does not report an alarm. Control of cameras or other units is not possible. Bosch Security Systems Possible causes Hardware fault. Faulty cable connections. Check all cables, plugs, Incorrect configuration. The audio voice connection is already in use by another receiver.
11.3 Customer service If a fault cannot be resolved, please contact your supplier or system integrator, or go directly to Bosch Security Systems Customer Service. The version numbers of the internal processors can be viewed on a special page. Please note this information before contacting Customer Service.
Defective or superfluous devices and parts should be disposed of professionally or taken to your local collection point for hazardous materials. Bosch Security Systems Installation and Operation Manual Maintenance | en 123 AR18-10-B006 | v1.1 | 2010.06...
Adjustable from Off to 10x Automatic continuous, Off Automatic noise filtering On/Off selectable Installation and Operation Manual FlexiDome2X IP Camera NDN-498V09 9 to 22 mm F1.4 0.32 lx color, 30IRE 0.11 lx mono, 30IRE Bosch Security Systems...
Page 126
> 50 dB 0.670 kg (1.477 lb) +SMB: 1.289 kg (2.842 lb) -20 °C to +50 °C (-4 °F to +122 °F) cold start (-50 °C [-58 °F] with heater enabled) Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
FlexiDome2X IP Camera 13.1.1 Dimensions Figure 13.1 Flush mount dimensions Bosch Security Systems 57.6 (2.27) 57.6 (2.27) 95 (3.7) 158 (6.22) Installation and Operation Manual Technical Data | en 127 mm (in) AR18-10-B006 | v1.1 | 2010.06...
Page 128
128 en | Technical Data FlexiDome2X IP Camera 53.3 (2.1) 53.3 (2.1) 158 (6.22) mm (in) Figure 13.2 Surface mount dimensions AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
FlexiDome2X IP Camera 13.1.2 Accessories Contact your Bosch representative for the latest available accessories. Bosch Security Systems Installation and Operation Manual Technical Data | en 129 AR18-10-B006 | v1.1 | 2010.06...
(Internet or LAN). Domain Name Service: A service that stores domain names and translates them into Internet Protocol (IP) addresses. AR18-10-B006 | v1.1 | 2010.06 0…9 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 131
Identification: a machine readable character string. Bosch Security Systems Installation and Operation Manual Glossary | en 131 AR18-10-B006 | v1.1 | 2010.06...
Page 132
It is controlled by a network operating system and uses a transfer protocol. Logical Unit Number: logical drive in iSCSI storage systems. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 133
(glass fiber cable). Parameters Values used for configuration. QCIF Quarter CIF: video format with 176 × 144/120 pixels (see CIF). Bosch Security Systems Installation and Operation Manual Glossary | en 133 AR18-10-B006 | v1.1 | 2010.06...
Page 134
Subnet maskSee Net mask. Transfer Control Protocol Telnet Login protocol with which users can access a remote computer (Host) on the Internet or local area network (LAN) connections. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual FlexiDome2X IP Camera Bosch Security Systems...
Page 135
Wide Area Network: A long distance link used to extend or connect remotely located local area networks. Bosch Security Systems Installation and Operation Manual Glossary | en 135 AR18-10-B006 | v1.1 | 2010.06...
Page 136
136 en | Glossary FlexiDome2X IP Camera AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Need help?
Do you have a question about the NDN-498V03-21P and is the answer not in the manual?
Questions and answers