Table of Contents
Advertisement
Dinion IP
| Installation Manual
Recording scheduler
Set all parameters for recording. Recording can be performed continuously or in
the case of an alarm.
Activating a partition for recording
After configuration, you can activate the partition for recording by clicking the
Start button.
After starting, the pages Continuous recording, Alarm recording and the
Properties for the activated partitions are displayed in gray, and the configuration
cannot be modified.
The graphic in the lower section of the pages indicates this partition's recording
activity. You will see an animated graphic while recording is taking place. You
can terminate recording at any time and deactivate the partition.
• Click the Start button to activate the currently selected partition for recording.
• Click the Stop button to deactivate the currently selected partition for
recording. Recordings that are currently running will be interrupted and the
configuration can be modified.
Bosch Security Systems | 2006-05 | V2.0
EN | 61
- Quick Links:
- Network (and Power)
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Dinion IP NWC-0495 and is the answer not in the manual?