Initiator Name; Initiator Extension; Decoupling The Drive Used; Storage Information - Bosch Dinion IP NWC-0495 Installation Manual

EN | 56

Initiator name

The initiator name is automatically displayed after a connection has been
established.

Initiator extension

Enter the initiator extension. For the sake of clarity, you can enter a name or the
existing extension with a comment, for example "– Camera 2"

Decoupling the drive used

Each drive can only be associated with one user. If a drive is already being used
by another person, you can decouple the drive and connect the drive with the
NWC-0495.
• Double-click a drive that is already being used in the LUN map. You will see
a warning message.
• Confirm the decoupling of the current user. The drive is released and can be
connected to the NWC-0495.

Storage information

The status of the currently selected storage medium and the data throughput are
displayed here for information. You cannot change any of these settings.
• Click Advanced to view a status report with logged actions. A new window
will open.
• In this window, click Delete to delete all entries. The entries will be deleted
immediately; you cannot undo this process.
• Click the Close button to close the window.
Dinion IP
| Installation Manual
Bosch Security Systems | 2006-05 | V2.0