Iscsi Lun Map; Target Ip Address; Target Name; Target Lun - Bosch Dinion IP NWC-0495 Installation Manual

Dinion IP
| Installation Manual

iSCSI LUN map

The LUN map displays the logical drives configured for the iSCSI storage device.
The current user is displayed for each drive.
• Double-click a free drive (LUN). The associated information is called up and
automatically displayed in the fields below the map.
• If the logical drive is password protected, you must first enter the password in
the Target password field and click the Set button.
Note
In cases where the information cannot be read due to the network
topology, you must enter the data manually, so that the NWC-0495 can
access the drive. In this case you should ensure that the entries correspond
exactly with the configuration of the iSCSI device.
• After entering all the settings in the relevant fields, click Set. The NWC-0495
attempts to create a connection to the required drive using this data.
As soon as a connection has been established, the selected drive is used for
recordings.

Target IP address

Enter the IP address of the required iSCSI server here.

Target name

Enter the name of the required drive.

Target LUN

Enter the LUN of the required drive.

Target password

If the drive is password protected, enter the password.
Note
You may not enter a new password. This is only possible by configuring
the iSCSI storage device.
Bosch Security Systems | 2006-05 | V2.0
EN | 55