Deleting Partitions - Bosch Dinion IP NWC-0495 Installation Manual

EN | 60
important sequences on the computer's hard drive before modifying the
partition.
You can perform the required modifications in the Partition properties window.
• Click the Edit partition button. A new window with the entries for the selected
partition is opened.
• Enter the necessary changes.
• Click the Set button to save the modifications.
• After closing the window, click the Set button in the main window to transfer
the changes to the unit and to save them.

Deleting partitions

You can delete a partition at any time.
Caution
Deleting a partition leads to the entire hard drive being reorganized and
loss of all sequences stored on the drive. Consequently, you should check
the recordings before deleting any partition and back up important
sequences on the computer's hard drive.
• Click the Delete partition button to delete the highlighted partition. The line
containing the associated number remains in the display, the partition number
is deleted and the size is indicated as 0.
• Click the Set button to transfer the changes to the unit and to save them.
Dinion IP
| Installation Manual
Bosch Security Systems | 2006-05 | V2.0