Table of Contents
Advertisement
Before You Connect the FRITZ!WLAN Repeater
2
Before You Connect the FRITZ!WLAN Repeater
Read this chapter before connecting the FRITZ!WLAN Repeater to the
power supply and the wireless access point.
2.1
Requirements for Operation
In order to operate the FRITZ!WLAN Repeater DVB-C, you must
have the following:
•
•
•
•
•
•
•
2.2
Security and Handling
When working with the FRITZ!WLAN Repeater, be sure to ob-
serve the following security instructions in order to protect
yourself and the FRITZ!WLAN Repeater from harm.
•
FRITZ!WLAN Repeater DVB-C
DVB-C signal (cable connection)
The wireless access point must support the
IEEE 802.11ac, 802.11n, 802.11g, 802.11b or 802.11a
standard
The wireless access point must support automatic IP ad-
dress assignment (DHCP)
The wireless access point must support forwarding of IP-
based protocols/Address Resolution Protocol
For configuration of the wireless LAN: The radio network
name (SSID) of the wireless access point must be visible
and the MAC address filter of the wireless access point
must be disabled. Both of these settings are configured
in a FRITZ!Box upon delivery.
For wireless LAN configuration with WPS: WPS-compliant
wireless access point with up-to-date firmware
For wireless LAN configuration: Wireless LAN client that
supports the WPA or WPA2 encryption standard
The FRITZ!WLAN Repeater has no On/Off switch. This
means it must be possible to disconnect the FRITZ!WLAN
Repeater from the power supply at any time.
–
Insert the the FRITZ!WLAN Repeater into an electrical
outlet that is easy to reach.
11
Advertisement
Table of Contents
