Memory Edit; Labeling Memories; Copying Memories; Deleting Memories - Yaesu FTM-350AR Operating Manual

The memory channels may be edited using Set Mode item "D02 MEMORY EDIT" in the
"MEMORY" group.
L M
ABELING EMORIES
1. Rotate the left side [ DIAL ] knob to select a memory channel to append or change the
label.
2. Press the [ V/M ] key for two seconds, and then add or change the label in the same
manner as step
C M
OPYING EMORIES
1. Rotate the left side [ DIAL ] knob to select the memory channel to be copied.
2. Press the [ SEL ] key. The selected column will blink.
3. Rotate the left side [ DIAL ] knob to select a memory channel to store the data.
4. Press the [ CPY ] key to copy the memory channel data.
5. Press the [ SEL ] key to save the data and stop the column blinking.
D M
ELETING EMORIES
1. Rotate the left side [ DIAL ] knob to select the memory channel to delete.
2. Press the [ SEL ] key. The selected column will blink.
3. Press the [ DEL ] key to delete the memory channel data.
FTM-350AR/AE O
M
EMORY

of the "Memory Storage" procedure (see page 6).
M
PERATING ANUAL
M
EMORY
E
DIT
O
PERATION
9