Yaesu FTM-350AR Operating Manual page 31

N O
AVI PERATION
To navigate to a place that has not been previously stored in the "Point" memory,
determine the longitude/latitude of that place from the map, then overwrite that
data into one of the previously stored "Point" memories.
1. Press the [ PLIST ] key to open the "Point" memory list.
2. Rotate the left side [ DIAL ] knob to select the "Point" memory you wish to
overwrite.
3. Press the left side [ DIAL ] knob to show the detail data of the "Point" memory.
4. Press the left side [ DIAL ] knob again to enable editing of the stored data.
5. Enter the new point by turning the left side [ DIAL ] knob to select the charac-
ter/number, and press the [
6. Press the [ ENT ] key to overwrite the setting.
7. Press the [ NAVI ] key to return to the "NAVI" Page, then press the [ NAVI ] key
again to initiate navigation.
FTM-350AR/AE O
( R
To Navigate to the New Point

] or [
M
PERATING ANUAL
O
EQUIRES PTIONAL

] key to move the cursor.
GPS A U
NTENNA
)
NIT
29