Memory Channel Sort - Yaesu FTM-350AR Operating Manual

M
EMORY
The memory channels may be sorted and renumbered by frequency, from low to high using
the "Special Function" mode.
1. Turn the radio off.
2. To enter the "Special Function" mode, turn the radio on while pressing and holding the
key located at the left of the [ POWER ] switch.
3. To sort the memory channels in the left band, rotate the left side [ DIAL ] knob to select
function menu item "3 L-MEMORY SORT". To sort the memory channels in the
right band, rotate the left side [ DIAL ] knob to select function menu item "4 R-
MEMORY SORT".
4. Press the left side [ DIAL ] knob, to display the confirmation message "OK? [ SET ] " on
the display. If you decide to cancel the memory channel sort, press the [ ESC ] key.
5. Press the left side [ DIAL ] knob again. After several seconds, sorting is complete, and
the transceiver will reset automatically.
10
O
PERATION
M C
EMORY
S
HANNEL ORT
FTM-350AR/AE O M
PERATING ANUAL