(S1 - S8 or OFF). Default: OFF 4. Press and hold in the [ MHz ( SETUP )] key for one second to save the new setting and exit to normal operation. FTM-3200DR Advance Manual...
Programming the Key Assignments Default FTM-3200DR key functions have been assigned to the Microphone [ P1 ] / [ P2 ] / [ P3 ] / [ P4 ] keys at the factory. The user may change these key function assignments, if quick access to another function is desired.
Advanced Operation Split Tone Operation The FTM-3200DR can be configured to operate in a “Split Tone” system via the Setup menu, to facilitate operation on repeaters using a mix of both CTCSS and DCS control. 1. Press and hold in the [ MHz ( SETUP )] key for one second to enter the Set mode.
3. Press the [ MHz ( SETUP )] key, and then rotate the DIAL knob to select “TSQL”. 4. Press and hold in the [ MHz ( SETUP )] key for one second to save the new setting and exit to normal operation. FTM-3200DR Advance Manual...
3. Press the [ MHz ( SETUP )] key, and then rotate the DIAL knob to select “DCS”. 4. Press and hold in the [ MHz ( SETUP )] key for one second to save the new setting and exit to normal operation. FTM-3200DR Advance Manual...
6. Press and hold in the [ MHz ( SETUP )] key for one second to lock in that tone and exit to normal operation. Note: The FTM-3200DR does not recognize the order of the 1st tone and the 2nd tone. In other words, for example, the FTM-3200DR considers both CTCSS pairs “05, 47”...
5. To disable the Enhanced Paging & Code Squelch, just repeat the above procedure, rotating the DIAL knob to select “OFF” in step 3 above. When the Enhanced Paging & Code Squelch feature is activated, the “P” notation will appear on the right of the frequency display. FTM-3200DR Advance Manual...
DTMF Operation DTMF tones (Dual Tone Multi Frequencies) are the tones you hear when dialing from a telephone keypad. The FTM-3200DR transceiver can transmit the DTMF codes by using the keys on the microphone or recalling registered number strings from memories.
7. When entry of all digits is complete, press and hold in the [ MHz ( SETUP )] key for one second to set the DTMF code and exit to normal operation. FTM-3200DR Advance Manual...
DIAL knob to select the desired speed (“50 MS”: High speed or “100 MS”: Low speed). 4. Press and hold in the [ MHz ( SETUP )] key for one second to save the new setting and exit to normal operation. FTM-3200DR Advance Manual...
(50 MS / 250 MS / 450 MS / 750 MS / 1000 MS). Default: 450 MS 4. Press and hold in the [ MHz ( SETUP )] key for one second to save the new setting and exit to normal operation. FTM-3200DR Advance Manual...
To place the radio into the Memory Only mode, turn the transceiver OFF. Now press and hold in the [ V/M ( MW )] key while turning the transceiver ON. The VFO and Home Channel will now be disabled. To return to normal operation, repeat the above power-on procedure. FTM-3200DR Advance Manual...
[ V/M ( MW )] key for one second to save the label and exit. While operating in the Memory Recall mode, press the [ MHz ( SETUP )] key to toggle the display between indication of the frequency, and indication of the Alpha/Numeric label. FTM-3200DR Advance Manual...
DIAL knob to select the desired scan-re- sume mode. Default: 5.0 SEC 4. Press and hold in the [ MHz ( SETUP )] key for one second to save the new setting and exit to normal operation. FTM-3200DR Advance Manual...
“OFF” in step 4 above, after first recalling the currently blocked channel (the “Skipped” channel is accessible via manual channel selection methods using the DIAL knob in the Memory mode, whether or not it is locked out of the scanning loop). FTM-3200DR Advance Manual...
Scanning Preferential Memory Scan The FTM-3200DR also allows setting up a “Preferential Scan List” of channels, which you can “flag” within the memory system. The flagged channels are designated by an “ ” icon when they are selected, one by one, for the Preferential Scan List.
Scanning Programmable Memory Scan (PMS) The FTM-3200DR can be set to tune or scan only the frequencies between user-defined lower and band limits. Example: Set up a PMS channel by registering a lower frequency of 144.300 MHz, and an upper frequency of 148.000 MHz to the L1/U1 memory channels.
MH-48A6JA Microphone. Band Edge Beeper The FTM-3200DR will automatically “beep” when the receive band edge is encountered during scanning (either in standard VFO scanning or during PMS operation). Additionally, the band edge beep feature may be enabled to sound when the band edge frequency is reached while tuning the VFO, using the DIAL knob.
Scanning Priority Channel Scanning (Dual Watch) The FTM-3200DR’s scanning features include a two-channel scanning capability which allows operating on a VFO, Memory channel, or Home channel, while periodically checking a user- defined Memory Channel for activity. If a station received on the Memory Channel is strong enough to open the Squelch, the scanner will pause on that station in accordance with the Scan-Resume mode setting of Menu item “SCAN RSM 39.”...
DIAL knob to select the desired polling interval (NORMAL or LONG). Default: NORMAL 3. Press and hold in the [ MHz ( SETUP )] key for one second to save the new setting and exit to normal operation. FTM-3200DR Advance Manual...
Clone The FTM-3200DR includes a convenient “Clone” feature, which allows the memory and configuration data from one transceiver to be transferred to another FTM-3200DR. This can be particularly useful when configuring a number of transceivers for a public service operation.
Setup (Menu) Mode The FTM-3200DR Setup (Menu) mode, already described in parts of many previous chapters, is easy to activate and setup. The Menus may be used to configure many of transceiver parameters, some of which have not been detailed previously. Use the following procedure to activate the Setup (Menu) mode: 1.
Page 26
Reduction of the Microphone Gain/Devia- 52: W/N DEV WIDE/NARROW WIDE tion and receiver bandwidth. 53: MY CALL Sets your station call sign - - - - - - - - - - ø: Depends on the transceiver version. FTM-3200DR Advance Manual...
Available Values: A / B Default: A This function is only used to move a spurious response “birdie”, should it fall on a desired frequency. Select “A” for the normal operation. 8 DC VOLT Function: Indicates the DC Supply Voltage. FTM-3200DR Advance Manual...
Available Values: 2 SEC / 4 SEC / 6 SEC / 8 SEC / 10 SEC / 20 SEC / 30 SEC / 60 SEC / CONTINUE / OFF Default: 10 SEC 13 DSQ CODE Function: Sets the squelch code in digital mode. Available Values: CODE 001 to CODE 126 Default: CODE 001 FTM-3200DR Advance Manual...
Page 29
BREAK: Regardless of the SQL CODE setting, outputs sound when the partner station transmits with the BREAK setting activated. OFF: Outputs sound whenever receiving digital signals from Yaesu transceivers. 15 DT AUTO Function: Enables/Disables the DTMF Autodialer feature. Available Values: MANUAL / AUTO...
Page 30
You will notice the first character entry’s location blinking. 3. Rotate the DIAL knob to select the first letter/number of the message, and then press the [ V/M ( MW )] key momentarily to move to the next character. FTM-3200DR Advance Manual...
Page 31
Available Values: SQL OFF / HOME / WX CH / CD SRCH / SCAN / T CALL / TX POWER / DIG/ANA / GM or one of the all Set mode items (except Set mode items #30 through 33; initial setting is “Set mode item #40 SCAN SKP”). Default: Depends on the transceiver version. FTM-3200DR Advance Manual...
Page 32
Default: OFF SKIP: The scanner will “skip” the flagged channels during scanning. SELECT: The scanner will only scan channels that are flagged (Preferential Scan List). OFF: All memory channels will be scanned (the “flag” will be ignored). FTM-3200DR Advance Manual...
Page 34
Function: Selects the audio output level of the Weather Alert. Available Values: NOR VOL / MAX VOL Default: NOR VOL 52 W/N DEV Function: Reduction of the Microphone Gain/Deviation and receiver bandwidth. Available Values: WIDE / NARROW Default: WIDE FTM-3200DR Advance Manual...
Page 35
4. To make a correction, press the [ SQL ( TXPO )] key to backspace the cursor; now re-en- ter the correct letter/number. 5. When the desired call sign is entered, press and hold in the [ MHz ( SETUP )] key for one second to save the settings and exit to normal operation. FTM-3200DR Advance Manual...
Page 36
YAESU MUSEN CO., LTD. All rights reserved. No portion of this manual YAESU MUSEN CO., LTD. may be reproduced Tennozu Parkside Building without the permission of 2-5-8 Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-0002 Japan YAESU MUSEN CO., LTD. YAESU USA 6125 Phyllis Drive, Cypress, CA 90630, U.S.A.