Table of Contents
Advertisement
The AF Dual function permits monitoring an amateur band frequency while listening to an
FM broadcast station.
Important Note: The AF Dual function will not activate while the radio is in "Mono" band
mode.
Press the [ F ] key repeatedly, until the [ SMART FUNCTION ] keys change to the
"F-2" mode.
Press the [ AD-F ] key to activate the AF Dual function.
The left side receiver switches to FM Broadcast. The right side receiver will monitor
the amateur frequencies, while you listen to the FM Broadcast station.
Rotate the left side [ DIAL ] knob to tune the desired FM broadcast stations.
To change the audio source to the AM Broadcast band, or Line-In audio, press and hold
the [ AD-F ] key for two seconds to access the Set Mode. Select the desired audio source
by rotating the left side [ DIAL ] knob, and then press the [ ESC ] key.
When a signal is received in the amateur band, the amateur band audio is output to the
speaker. The FM or AM broadcast station will no longer be heard.
When the right side receiver is set in the amateur band by "Main" band, you may
transmit on the amateur band by pressing the [ PTT ] key.
Press the [ AD-F ] key to disable the AF Dual function and return to normal operation.
When operating with APRS or
Packet on the left side band, the
operating frequency and baud
rate of the APRS or Packet op-
eration will appear on the dis-
play.
FTM-350AR/AE O
AF D
M
PERATING
ANUAL
UAL
Operating Frequency
O
PERATION
Baud Rate
11
Advertisement
Table of Contents
