Operation - Yaesu FTM-350AR Operating Manual

1. When the Bluetooth
ceiver, " " icon will appear on the transceiver's display, and the LED indicator on the
Headset will blink blue.
Bluetooth ®
2. Adjust the receiver audio level using the [ VOLUME ( + )] / [ VOLUME ( – )] switches on
the Bluetooth
3. Press the PTT switch on the Bluetooth
to return to receive.
4. If the BH-2A Bluetooth
five steps, by pressing the [ VOLUME ( + )] or [ VOLUME ( – )] switches on the
Headset while holding the PTT switch.
®
Bluetooth
5. The communication range between the Bluetooth
around 1 m (3 ft). If you move out of range, a beep will be heard from the Bluetooth
Headset to alert you. If you move back into range, the Bluetooth
to alert you that you are back within range.
6. When the battery voltage of the Bluetooth
a. the LED on the Bluetooth
b. a beep will be heard from the Bluetooth
c. the " " icon on the transceiver's display will be blinking fast.
Charge the battery of the Bluetooth
In the factory default setting of the FTM-350 Series Transceiver, the internal and external
speakers, the front panel microphone, and front panel MIC jack are all disabled when the
Headset is correctly recognized. However, the microphone connected to the
Bluetooth ®
transceiver's MIC jack is still alive.
You may customize the Bluetooth
in the "OPTION" group. See page 47.
FTM-350AR/AE O
B
LUETOOTH ®
O
Headset is correctly recognized by the FTM-350 Series Trans-
®
Headset.
®
Headset is used, the microphone gain may be adjusted in
®
Headset will blink Red and Blue.
®
operation via Set Mode items "K01 BLUETOOTH"
®
M
PERATING ANUAL
PERATION
Headset to transmit. Release the PTT switch
®
®
Headset is low;
®
Headset.
®
Headset.
®
O
PERATION
Headset and the transceiver is
Headset will beep
®
®
19