Audio Playback Operation - Yaesu FTM-350AR Operating Manual

A P
UDIO LAYBACK
The FTM-350 Series Transceiver can record an incoming signal. The recording mode has
two types; (a) automatic recording of the last 30 seconds of incoming signal ("Last" mode),
or (b) eight recording memories of variable length ("Free" mode; capable of storing up to
five minutes of total recording time).
Before beginning the Audio Playback Operation, set each parameter of the Voice Guide
Unit, via Set Mode item "K03 VOICE" in the "OPTION" group. See page 48.

Press the [ F ] key repeatedly until the [ SMART FUNCTION ] key changes to the "F-3"

category (or "F-4": when the APRS function is activated).
Press the [ REC ] key to initiate recording.

Press the [ STOP ] key to terminate the recording process.

 To play back the recorded data:
"Last" mode: press the [ PLAY ] key. The last 30 seconds of the recorded audio will
be heard from the speaker.
"Free" mode: press and hold the [ PLAY ] key repeatedly, until the "recording slot"
you wish to hear appears, then press the [ PLAY ] key briefly. You will
hear the recorded audio.
Press the [ CLR ] key to clear all the recorded audio, if desired.

30
O
PERATION ( R
  

FTM-350AR/AE O
O V
EQUIRES PTIONAL
PERATING
)
G U
OICE UIDE NIT


M
ANUAL