305.book Page 41 Tuesday, April 15, 2003 11:15 AM
Installation
Audio Settings
If you are in SAT mode (digital) broadcast, two options appear on the Audio
Settings menu.
Audio Connections. Select option 1 (Audio Connections), and you will be able
to select either TV or HiFi (the default is TV). Select TV if the receiver's audio out
port is connected to your TV. Select HiFi if it is connected to your stereo system.
Satellite Audio. Select option 2 (Satellite Audio) and then select Mono, Stereo,
or Surround.
Installation Settings
Tune in Satellite Signal. This option allows you to see the strength of the signal
your antenna is receiving.
Set VCR Code
This option allows you to store your VCR code in your receiver. When you use
timers and want to record your favorite program, your receiver will control your
VCR.
Set Remote Control Address. This option allows you to control up to four
receivers in a centralized area with one or more remote controls. Each receiver
requires a separate address. The default address is 000.
DSR305 User Guide
41