Table of Contents
Advertisement
Operating the DSR-4410
This field is not editable when the Auto option in the Mode field is selected. This field
displays the polarity to which the port is related. This field will display the default when
the port is not related to a satellite. The defaults for Port0 and Port1 are H/LHP and
V/RHP, respectively.
Audio1 and Audio2 Menus
Press the56buttons until an Audio1 menu or Audio2 menu appears. These menus have
three fields that allow the user to customize the audio output based on options provided by
the Dolby Digital compression system.
DialNorm Field
Press the4button until the cursor is at the DialNorm label. This field allows the user to
normalize speech levels to a constant level over all channels—raising or lowering the
volume of the dialogue to a level that is appropriate for the background sound track. Press
the Enter button to move into the field. There are two options, On and Off. The default
selection is On. Press the56buttons to change the setting. Press Enter to confirm
selection.
AudioMix Field
Press the4button until the cursor is at the AudioMix label, and press the Enter button to
move into the field. This field allows selection of the audio downmix options. The choices
are Stereo, Surround, Mono, or Dual Mono. Press the56buttons to display the options.
The default setting is Stereo.
If you select Dual Mono, a warning screen will appear. The warning screen is needed
because of possible conflicts between this menu and the channel selection menus that
specify audio language. It appears if the user had previously used the Language menu
(channel selection group) to select a single language for Mono or Stereo output and then
DSR-4410
19
Hide quick links:
Advertisement
Table of Contents
