305.book Page 11 Tuesday, April 15, 2003 11:15 AM
Using Your Remote
Your remote control's appearance may vary, and some
of the following descriptions may not apply to it.
Different remote models can control the following
different combinations of equipment:
• Receiver and TV
• Receiver, TV, and VCR
• Receiver, TV, VCR and auxiliary equipment.
A Word About Modes. To enable the remote control to
operate your receiver, your TV, and your VCR, it may
have as many as four main modes of operation: SAT
mode, TV mode, VCR mode and AUX mode. This
means that when you press the SAT, TV, VCR or AUX
keys on the remote control, you enable it to control each
of these devices, one at a time. Naturally, some of the
remote control keys have more than one function,
depending upon which mode you are using at the time.
Keep this in mind as you read the descriptions for each
remote control key. Also keep in mind that some SAT
functions are available only within SAT mode. Among
these special functions are access to the menus through
the OPTIONS key, use of the Interactive Program
Guide (IPG) through the GUIDE key, and the ability to
select a satellite by using the SAT key.
If You Misplace the Remote Control. If you ever
misplace the remote control and need to use the various menus, just press the
MENU key on the Front Panel and a special Menu screen will appear. This feature
is only available on certain models in the 400 Series IRD.
DSR305 User Guide