Table of Contents
Advertisement
CESSNA 152
8) Move the throttle stick to the closed posi-
tion and move the carburetor to closed. Use
a 2.5mm hex wrench to tighten the screw
that secures the throttle pushrod wire. Make
sure to use threadlock on the screw so it does
not vibrate loose.
12 12
Instruction Manual.
LANDING GEAR INSTALLATION.
A. NOSE GEAR:
1)Locate the items necessary to attach the
nose landing gear that are included with
your model.
Thread locker glue.
Thread locker glue.
Drill 4mm.
Advertisement
Table of Contents
