Split Mode Functions - F4 - Galileo Concerto User Manual

Concerto
RESET – F3.6
Recalling the F3.6 function will allow restoration of the default (reset) values of all the Dual
mode functions, as follows:
Detune: 0
1st Voice Octave Shift: 0
2nd Voice Octave Shift: 0
1st Voice Effect Depth: depends on the voice and the effect
2nd Voice Effect Depth: depends on the voice and the effect
After you press [DEMO/ENTER] from video page "F3.6" the display will show:
To perform the reset, select "Yes" using the [VALUE

14.5 SPLIT MODE FUNCTIONS - F4

As for the Dual mode, the Function menu allows you to set a number of parameters
dedicated to the Split mode. As explained in point 14.1, these functions can only be selected
if the Split mode is active.
After displaying the video page:
press [DEMO / ENTER]; the display will show the first function of the Split mode. Use the
[VALUE] buttons to select the function you require and [DEMO/ENTER] to display its
contents.
NOTE
The settings made in the functions described below are only effective when
the voices are played in Split mode. For example, if the tuning of the first
voice is changed, it will only play with the new pitch in Split mode; when it
is played on its own the original tuning will be used, and in Dual mode the
pitch will depend on the settings of the Dual functions.
] button and press [DEMO/ENTER].
29
User Manual