Galileo Concerto User Manual page 36

Concerto
LOCAL CONTROL ON/OFF – F6.3
The Local Control function allows you to select whether notes played on the piano keyboard
are to be played using its own sound generation (Local On) or whether the data are only to
be transmitted on the [MIDI OUT] or [TO HOST] port (Local Off). In Local Off mode, the
instrument still receives the data reaching the [MIDI IN] port.
To set up this function, select "F6.3" on the display and press [DEMO/ENTER]. The current
condition will be displayed, as follows:
• ON: Local On, the instrument plays using its own sound generation system.
• OFF: Local Off, the instrument only transmits the data on the [MIDI OUT] or [TO HOST]
port.
To select the mode required use the [VALUE] buttons. Press the same buttons
simultaneously to restore the default condition (Local On).
PROGRAM CHANGE ON/OFF – F6.4
This function allows you to enable or disable the transmission / reception of Program
Change messages.
When you select a voice on the channel, the instrument automatically transmits a Program
Change in order to set the same type of voice on any connected instrument.
Similarly, when a Program Change is received on the [MIDI IN] or [TO HOST] ports, the
instrument will automatically activate the voice associated to the PG received.
If this function is not necessary, it can simply be deactivated. To do this, select "F6.4" on
the display and press [DEMO/ENTER].
The display will show the condition currently active. Use the [VALUE] buttons to make the
selection. The default condition ([VALUE] buttons pressed simultaneously) is On.
NOTE
For information about the association between Program Changes and
voices on the panel, consult the "MIDI Implementation Chart" at the back
of the manual.
34
User Manual