The Dual Mode - Galileo Concerto User Manual

Concerto

10. THE DUAL MODE

The Dual mode allows you to play two voices simultaneously throughout the extension of
the keyboard.
To activate the Dual mode, press the buttons of the two voices you wish to play,
simultaneously. When the LEDs of the two buttons are on, both the voices are enabled.
To return to playing just one voice, press the button of the voice of your choice:
The [BALANCE] slider allows you to regulate the volume balance between the two voices;
the 1ST voice is the one with the lower number, following the numbering provided in the
chart. The voice with the higher number will be set as the 2ND voice.
EXAMPLE OF 1ST AND 2ND VOICES
If the Rock Piano and Acoustic Guitar voices are played in Dual mode,
Rock Piano will be the 1ST voice and Acoustic Guitar the 2ND. If the
Acoustic Guitar voice is played together with Strings 1, A.Guitar will be the
1ST voice, and Strings 1 the 2ND.
In Dual mode the reverb set for the 1ST voice will also be assigned to the 2ND, while the
effects and types of keyboard touch are unchanged (so the voices can be played with two
different effects and dynamics).
The [REVERB], [EFFECT] and [KEY TOUCH] LEDs indicate the reverb, effect and touch
set for the 1ST voice, as do the Depth and fixed dynamic values which can be displayed
by pressing these buttons.
However, you can also adjust the Effect Depth of the 2ND voice by recalling the function
F3.5 in the function menu (point 14.4).
You can also use the Functions menu (chap. 14) to adjust the pitch in one hundredths of
a semitone of the 1ST voice in relation to the 2ND voice (function F3.1), the transposition
of the two voices in octaves (F3.2 and F3.3), and the effects Depth (F3.4 and F3.5) when
the Dual mode is active.
15
User Manual