Table of Contents
Advertisement
Concerto
14. THE FUNCTION MENU
Pressing the [FUNCTION] button allows you to set a series of the piano's internal functions
to suit your own needs.
The functions are shown on the display as a series of numbers. However, an acronym is
always available to inform you which function is currently selected: to display the acronym,
press the [DEMO / ENTER] button for a few moments while the function's number is on
the screen. The following is the list of the functions available:
F1
Tuning
F2
Scale
F3
Dual Mode functions (only in Dual mode)
F3.1 Detune
F3.2 1ST Voice Octave Shift
F3.3 2ND Voice Octave Shift
F3.4 1ST Voice Effect Depth
F3.5 2ND Voice Effect Depth
F3.6 Dual functions reset
F4
Split Mode functions (only in Split mode)
F4.1 Split Point
F4.2 1ST Voice Octave Shift
F4.3 2ND Voice Octave Shift
F4.4 1ST Voice Effect Depth
F4.5 2ND Voice Effect Depth
F4.6 Split functions reset
F5
Pedal functions
F5.1 Soft pedal Mode
F5.2 Strings Resonance Level
F5.3 Damper Effect Amount
F6
MIDI functions
F6.1 Transmit Channel
F6.2 Receive Channel
F6.3 Local Control On/Off
F6.4 Program Change On/Off
F6.5 Control Change On/Off
F6.6 MIDI Transmit Transpose
F6.7 Song Data Dump
F6.8 Panel Data Dump
F6.9 MIDI functions reset
F7
Firmware release
NOTE
It is not possible to recall the Function menu from the Demo mode or from
the metronome, transposition and effects setting video pages.
23
User Manual
Advertisement
Table of Contents
