Table of Contents
Advertisement
Concerto
During display of the Split mode values or functions, you can change the active voices
without exiting the Function menu. In this case the Effect Depth values (F4.4 and F4.5) will
be updated in accordance with the active voices and effects.
SPLIT POINT – F4.1
Function F4.1 allows you to set the split point to be used to divide the 1ST voice section of
the keyboard from the 2ND voice section.
The setting is exactly the same as the one which can be made by pressing the [SPLIT]
button (see point 11.1).
Press [DEMO/ENTER] after selecting "F4.1" on the display to show the key which is currently
the split point:
You can use the [VALUE] buttons or the keyboard key itself to set a new split point.
Press the same buttons simultaneously to restore the default split point (F#2).
1ST VOICE OCTAVE SHIFT – F4.2
2ND VOICE OCTAVE SHIFT – F4.3
The F4.2 and F4.3 functions allow you to lower or raise the notes of the first and second
voices respectively by one octave, when the voices are played in Split mode.
Use the [VALUE] buttons to set the value required.
To restore the default value (0), press the [VALUE] buttons simultaneously.
NOTA
These parameters doesn't modify the MIDI notes transmitted to the [MIDI
OUT].
30
User Manual
Advertisement
Table of Contents
