Table of Contents
Advertisement
Concerto
1ST VOICE EFFECT DEPTH – F4.4
2ND VOICE EFFECT DEPTH – F4.5
The Effect Depth functions allow you to regulate the depth of the effect ([EFFECT] LED)
currently active. The value which can be set is not fixed; it varies depending on the voice
and effect selected.
This means that an Effect Depth of 10 can be set when the Chorus is applied to the Grand
Piano, with 14 set for the same effect when used with E.Piano 1. To adjust the values, use
the [VALUE] buttons.
Press the same values simultaneously to restore the default values (which vary depending
on the voice and effect selected).
NOTA
If the Effect Depth function is recalled with no effect currently active for the
voice selected, the display will show:
i.e. "no Effect".
RESET – F4.6
Recalling the F4.6 function will allow restoration of the default (reset) values of all the Split
mode functions, as follows:
Split Key: F#2
1st Voice Octave Shift: 0
2nd Voice Octave Shift: 0
1st Voice Effect Depth: depends on the voice and the effect
2nd Voice Effect Depth: depends on the voice and the effect
After you press [DEMO/ENTER] from video page "F4.6" the display will show:
To perform the reset, select "Yes" using the [VALUE
] button and press [DEMO/ENTER].
31
User Manual
Advertisement
Table of Contents
