Galileo Concerto User Manual page 30

Concerto
1ST VOICE OCTAVE SHIFT – F3.2
2ND VOICE OCTAVE SHIFT – F3.3
The F3.2 and F3.3 functions allow you to lower or raise the notes of the first and second
voices respectively by one octave, when the voices are played in Dual mode.
Use the [VALUE] buttons to set the value required.
To restore the default value (0), press the [VALUE] buttons simultaneously.
NOTE
These parameters doesn't modify the MIDI notes transmitted to the [MIDI
OUT].
1ST VOICE EFFECT DEPTH – F3.4
2ND VOICE EFFECT DEPTH – F3.5
The Effect Depth functions allow you to regulate the depth of the effect ([EFFECT] LED)
currently active. The value which can be set is not fixed; it varies depending on the voice
and effect selected.
This means that an Effect Depth of 10 can be set when the Chorus is applied to the Grand
Piano, with 14 set for the same effect when used with E.Piano 1.
To adjust the values, use the [VALUE] buttons. Press the same values simultaneously to
restore the default values (which vary depending on the voice and effect selected).
NOTA
If the Effect Depth function is recalled with no effect currently active for the
voice selected, the display will show:
i.e. "no Effect"
28
User Manual