Galileo Concerto User Manual page 38

Concerto
User Manual
SONG DATA DUMP – F6.7
The Song Data Dump function allows you to transmit all the data contained in the
instrument's internal sequencer to the [MIDI OUT] or [TO HOST] port. After connecting a
sequencer to [MIDI OUT] or a computer to [TO HOST], you can make back-up copies of
the songs on the internal sequencer, preventing accidental deletions.
To start the Data Dump select function F6.7 and press [DEMO/ENTER]. Using the [VALUE]
buttons, you can select:
• NO: The sequencer Data Dump is not transmitted.
• TR1: only the data relating to track 1 are transmitted.
• TR2: only the data relating to track 2 are transmitted.
• ALL: the data of both tracks are transmitted.
After selecting the option you require, press [DEMO/ENTER] to start the transmission of
data; the display will show:
and, once the operation is complete:
PANEL DATA DUMP – F6.8
The Panel Data Dump function allows you to transmit the current panel setup on the [MIDI
OUT] or [TO HOST] port.
This function is particularly useful when you are saving your performances on a remote
sequencer. If you set the panel Data Dump at the start of the track (on the remote
sequencer), when you retransmit the whole track to the piano the instrument will be set up
exactly as it was when you performed the song.
To start the transmission of data, recall function F6.7 onto the display and press [DEMO/
ENTER].
Then select "Yes" using the [VALUE ] button and press [DEMO/ENTER] again; the
display will show the message illustred on the next page.
36