Firmware Version - Galileo Concerto User Manual

Concerto
• Start: message used to start playback or recording of a performance.
• Stop: this message stops playback/recording.
These messages allow synchronisation of the piano's internal sequencer with remote
instruments capable of transmitting this type of message.
• Continue: this message allows playback/recording to be restarted from the bar after
the last Stop to take place.
N.B.: The piano does not process the Continue message.
• Active Sensing: this message is transmitted to keep the dialogue between connected
MIDI device active and is sent every 300 msec. if no other MIDI messages are
transmitted. If a MIDI instrument does not receive messages or a new Active Sensing,
after 300 msec. it resets the internal MIDI IN parameters, assuming that the connection
has been interrupted or the connected device has been switched off.
Finally, System Exclusive Messages are those instructions that can only be interpreted by
a device identical to the one which generated them. In the piano, system exclusive
messages are used for coding of:
- Reverb Type
- Effect Type
- Song Data Dump
- Panel Data Dump
14.8 FIRMWARE VERSION - F7
Pushing [DEMO/ENTER] after having seen on the display "F7" it is possibile to be informed
about the firmware version installed in the instrument:
Push again [DEMO/ENTER] to go back to the previous display or [FUNCTION] in order to
leave the Function menu.
40
User Manual