Galileo Concerto User Manual page 39

Concerto
and, at the end of the Data Dump,
NOTES
Consult chap. 15 for the connections to be made for Song Data Dump and
Panel Data dump.
The data stored using the Song Data dump and Panel Data dump functions
can only be reloaded into instrument.
LOADING SONG AND/OR PANEL DATA DUMPS INTO THE PIANO
To reload the MIDI data recorded on a remote sequencer / computer using the Data Dump
procedures described earlier into the piano, first make the connections as described in
chap. 15. After this, simply transmit the data using the sequencer / computer (normally, a
PLAY key is provided on both hardware and software sequencers).
On receipt of the data, the piano will automatically recall the loading procedure, showing
the percentage of the data received on the display. Once the operation is complete, the
display will show "End" for a moment.
NOTE
During reception of MIDI data, it is best not to switch off the instrument or
the sequencer/computer, or interrupt the operation, until it has been
completed.
RESET – F6.9
Function F6.9 allows you to reset all the MIDI parameters with the default values, which
are as follows:
Transmit Channel:1
Receive Channel:1
Local Control ON
Program Change ON
Control Change ON
MIDI Transmit Transpose: 0
37
User Manual