Outlets; Material - REMEHA Quinta Pro Installation, User And Service Manual

Type Version
C Concentric
93
123157 - v.07 - 10082015
Diameter (D) Without air supply
Ø duct
60/100 mm 120 mm
80/125 mm 145 mm
100/150 mm 170 mm

6.5.2 Outlets

Drain systems (roof feed-through and outside wall feed-through) must be
supplied by the following manufacturers:
Centrotherm
Cox Geelen
Muelink & Grol
Natalini
Poujoulat
Ubbink
Note
Where regulations stipulate that a wire grille must be fitted, use a
suitable grille made from stainless steel.
Boiler-specific roof and outside wall feed-through kits are also available.
Note
Contact us for more information.

6.5.3 Material

Warning
The coupling and connection methods may vary depending on
the manufacturer. It is not permitted to combine pipes, coupling
and connection methods from different manufacturers.
The materials used must comply with the prevailing regulations
and standards.
Tab.11 Flue gas outlet pipework materials
Design
(1)
Single-wall, rigid
Flexible
(1) The sealing must conform to pressure class 1
(2) With CE marking
Tab.12 Air supply pipework materials
Version
Single-wall, rigid
Flexible
With air supply
□ duct Ø duct
120 x 120 mm 120 mm
145 x 145 mm 145 mm
170 x 170 mm 170 mm
Material
(2)
Thick-walled, aluminium
Plastic T120
Stainless steel
Plastic T120
Stainless steel
Material
Aluminium
Plastic
Stainless steel
Aluminium
Plastic
Stainless steel
6 Installation
□ duct
120 x 120 mm
145 x 145 mm
170 x 170 mm
25