Installing A 2.5" Or 3.5" Sata Drive; Installing A 2.5" Sata Drive - DFI DT122-HD User Manual

Installing a 2.5" or 3.5" SATA Drive

Installing a 2.5" SATA Drive

1. Remove the 4 mounting screws that secure the drive bay to the chassis and then remove the
drive bay.
Mounting screw
Drive bay
2. Turn to the other side of the drive bay and remove the 4 mounting screws that secure the HDD
brackets to the drive bay.
Mounting screw
Chapter 3 Installing Devices
Chapter 3
Mounting screw
Drive bay
3. Align the mounting holes of the SATA drive with the mounting holes on the HDD bracket and
then use the provided mounting screws to secure the drive in place.
Mounting screw
Mounting screw
HDD bracket
12
SATA drive
www.dfi .com