Ip Qos Traffic Rule - Motorola VT2142 User Manual

Overview

IP QoS Traffic Rule

This window displays when you click Add on the
packets.
IP QoS Traffic Rule fields
Field
Rule Name
Source IP
Source Start Port
Destination IP
Destination Start Port
Packet Length Start
Protocol
Traffic Priority
Source Netmask
Source End Port
Destination Netmask
Destination End Port
Packet Length End
Physical Port
VT2142 Voice Gateway User Guide
Installation Troubleshooting
Configuration:
Description
The rule name
Sets the source IP address for the rule
Sets the source start port
Sets the destination IP address
Sets the destination start port
Sets the minimum packet size for the rule
Sets the protocol — TCP, UDP, ICMP, or Any
Sets the priority for traffic matching these characteristics — High or Low
Sets the source subnet mask, which along with the Source IP specifies a range of source
IP addresses
Sets the source end port
Sets the destination subnet mask, which along with the Destination IP specifies a range of
destination IP addresses
Sets the destination end port
Sets the maximum packet size allowed by the rule
Can be none or Eth0
Contact
Basic Advanced
IP QoS window. It enables you to define rules for filtering
FAQ Glossary License
TCP/IP
25