Ip Qos Traffic Rule - Motorola VT2442 User Manual

Overview

IP QoS Traffic Rule

This window displays when you click Add on the
packets.
IP QoS Traffic Rule fields
Field
Rule Name
Source IP
Source Start Port
Destination IP
Destination Start Port
Packet Length Start
Protocol
Traffic Priority
Source Netmask
Source End Port
Destination Netmask
Destination End Port
Packet Length End
Physical Port
VT2442 Voice Gateway User Guide
Installation Troubleshooting
Configuration:
Description
The rule name
Sets the source IP address for the rule.
Sets the source start port.
Sets the destination IP address.
Sets the destination start port.
Sets the minimum packet size for the rule.
Sets the protocol — TCP, UDP, ICMP, or Any.
Sets the priority for traffic matching these characteristics — High or Low.
Sets the source subnet mask, which along with the Source IP specifies a range of source
IP addresses.
Sets the source end port.
Sets the destination subnet mask, which along with the Destination IP specifies a range of
destination IP addresses.
Sets the destination end port.
Sets the maximum packet size allowed by the rule.
Can be none, Port 1, Port 2, Port 3, Port 4, or WLAN.
Contact
Basic Advanced
IP QoS window. It enables you to define rules for filtering
FAQ Glossary
TCP/IP Wireless
License
26